Figure 1-59 Opening The Side Cover; Figure 1-60 Pulling Out The Used Imaging Unit - NEC IT3510 Operation Manual

Issue 1
1 - 54
2. If an old IU is to be replaced, pull out the used IU by grasping the green
levers while pushing firmly against the machine's body with your
thumbs.
i
This step is not necessary when installing the initial IU.

Figure 1-59 Opening the Side Cover

3. While holding the handle with one hand, gently pull out the used IU.
i
This step is not necessary when installing the initial IU.

Figure 1-60 Pulling Out the Used Imaging Unit

NEC IT Series
Getting Started