Destination Insertion - NEC IT3510 Operation Manual

Issue 1
2.12
6 - 22
Setting the TSI (Continued)
3.
Select [Set 2] from [FAX Menu],
the touch [TSI].
4.
Select the destination.
5.
Press <Start>. Transmission
now begins.

Destination Insertion

When a document is transmitted, the recipient's name can be printed along
with the TSI. The recipient can easily confirm to whom the document is
addressed.
Before Starting Operations:
This function prints a recipient name as it is registered in a One-Touch key or as an
Abbreviated Dialing key. The recipient's information must be registered in advance as
a One-Touch key, or as an Abbreviated Dialing key.
The recipient's name cannot be inserted when using 10-key dialing, or when the Chain
Dialing feature is used.
The name of each recipient is printed on documents when using Serial Broadcast
Transmission.
The setting is reset after each transmission.
Destination Insert
1.
Load the document in the unit.
Refer to Section 5 Handling
Documents in Chapter 1 Getting
Started on page 1-25.
2.
Press <FAX/MAIL>.
Advanced Sending and Receiving Operations
NEC IT Series