Serial Broadcast Transmission - NEC IT3510 Operation Manual

NEC IT Series
2.2
NEC IT3510/IT2510 Operations Manual

Serial Broadcast Transmission

Serial Broadcasting allows transmission of a document to multiple
destinations. The document is stored in memory, then the IT3510/IT2510 can
sequentially send the document to up to 210 destinations.
Before Starting Operations:
Up to 210 destinations can be selected for each transmission. However, only up to
twelve can be specified when using the 10-key Pad for dialing the destination.
Using One-Touch Dialing and Abbreviated Dialing:
Facsimile numbers must be registered in advance. Refer to Section 2.16 Registering
One-Touch Keys in Chapter 3 Registration and Setting Operations on page 3-50, and
Section 2.17 Registering Abbreviated Numbers in Chapter 3 Registration and Setting
Operations on page 3-58.
More than one number can be registered in a Program key. Refer to Section 2.19
Registering Program Keys in Chapter 3 Registration and Setting Operations on page
3-67.
Serial Broadcast Transmission
1.
Load the document in the unit.
Refer to Section 5 Handling
Documents in Chapter 1 Getting
Started on page 1-25.
2.
Touch <FAX/MAIL>.
3.
Select all the destinations to
which the document is to be
sent.
Selecting with One-Touch Keys:
1. On the One-Touch
screen(s), select all the
destinations required.
Refer to Section 2.6
Using One-Touch
Dialing in Chapter 5
Basic Sending and
Receiving Operations
on page 5-7.
Issue 1
6 - 7