NEC IT3510 Operation Manual page 235

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Registering Users (Continued)
Registering the User's TSI:
1. Select [User 2], then touch [User
TSI].
2. Enter the User TSI, then touch
[Enter].
i
Refer to Section 1.5 Entering
Characters for Registration on page
3-5.
Registering the F CODE:
1. Select the [F CODE] tab, then
touch [F CODE].
2. Use the 10-key Pad to enter the
F Code, then touch [Enter].
i
Make sure that F Codes entered
are not duplicated for the
mailboxes and bulletin boards.
i
Use [
and re-enter the number, or press
<C> to re-enter the number.
When
character on the cursor is deleted.
When Cancel is touched, it returns to
the initial status.
Refer to Section 2.17 F CODE in
Chapter 6 Advanced Sending and
Receiving Operations on page 6-
29.
] or [ ] to move the cursor
[Delete] is touched, the
Issue 1
3 - 41