Attaching Cover Sheets To Copies - NEC IT3510 Operation Manual

Issue 1
2.8
2 - 50
Setting for a Margin of a Document (Continued)
3.
Use the or
L M
the width of the margin and
touch [Enter].
i
To Select:
Figures ranging from 0 to 3/4 inch (0 to
20 mm) can be set.
Every time the
value is decreased by 1/16 inch (1 mm).
Every time the
value is increased by 1/16 inch (1 mm).

Attaching Cover Sheets to Copies

Different types of paper, such as colored paper, can be used for cover sheets
when at least two sets of a document are copied.
Before Starting Operations:
When attaching a cover sheet, the document should be set in the ADF. A cover
sheet cannot be attached if the original document is placed in the Book Scanner.
Paper to be used for cover sheets should be inserted into a different paper cassette
to distinguish it from cassettes with plain copy paper.
Cover sheet paper should be inserted in the cassette in the same direction as the
plain paper used for copies.
Both front and back cover sheets can be attached.
Copying is possible on the cover sheet paper.
Methods of Attaching Cover Sheets
There are six variations for attaching cover sheets to a document.
1. Front Cover Sheet - Blank
arrow to adjust
M is touched, the set
is touched, the set
L
Back Cover Sheet - None
NEC IT Series
Copy Operations