NEC IT3510 Operation Manual page 15

NEC IT Series
Do not operate the product or install any
machine options during a thunderstorm.
Such actions may result in an electric shock or
product failure.
Do not place the product in direct sunlight or
near a heater.
Such an environment may cause product failure
or even a fire due to extreme temperatures
inside the machine chassis.
Do not place the product in a humid, dusty,
smoky, or steamy environment.
Such an environment may cause product failure
or poor performance in the scanning and printing
mechanisms.
Do not cover the ventilation grille on the
product.
If this grille is blocked or covered, internal
temperature will rise and may cause product
failure.
NEC IT3510/IT2510 Operations Manual
This is a caution that indicates a hazard that can lead to injury or
damage to property
.
Warnings
Do not touch the toner fixing unit located
inside the machine, or the area around it, as
it becomes extremely hot.
Some areas are hot enough to cause serious
burn injury.
Cautions
Do not place the product on an uneven
surface, or somewhere that is subject to
vibration or mechanical instability.
Such an environment may cause injury or failure
if the product falls down or tips over.
The ground cable must be connected.
In certain cases, a ground cable should be
connected to an independent earth ground. Do
not connect the ground to a gas pipe, lightning
rod, water pipe, or a telephone ground.
Hold the solid plug when disconnecting the
power cord.
The power cord should be disconnected by
holding and pulling on the solid plug part and not
on the cord itself. Pulling on the cord may cause
power cord damage, resulting in a fire or electric
shock.
Issue 1
9