NEC IT3510 Operation Manual page 182

Issue 1
2 - 60
Setting Up File Margins (Continued)
3.
Select [Auxiliary] and touch
[File Margin].
4.
Touch the key to set the file
L
margin position (at the left or at
the top).
i
Copying Style:
When Left is selected for the file margin
position, both the front and back of the
document is copied in the same
direction as the original.
When Top is selected, the back of the
document is copied upside-down to the
original document.
5.
Use the or
L M
the file margin width, then touch
[Enter].
i
To Select:
Figures ranging from 0 to 3/4 inch (0 to
20 mm) can be set.
Every time the DOWN arrow is touched,
the set value is decreased by 1/16 inch
(1 mm).
Every time the UP arrow is touched, the
set value is
inch(1 mm).
i
The copy image may be lost if the
file margin width is set more than
is necessary. An appropriate size
must be set for the file margin
width.
arrow to select
increased by 1/16
NEC IT Series
Copy Operations