NEC IT3510 Operation Manual page 392

Issue 1
6 - 28
Polling Transmission (Continued)
4.
Select the image quality for the
document to be sent, then touch
[Next].
Refer to Section 2.9 Sending Fine
Print and Photos in Chapter 5
Basic Sending and Receiving
Operations on page 5-12.
5.
Select the contrast setting for the
document to be sent, then touch
[Next].
Refer to Section 2.10 Adjusting
Contrast in Chapter 5 Basic
Sending and Receiving
Operations on page 5-14.
6.
Select the reduction and the
scanning area of the document
to be sent, then touch [Next].
Refer to Section 2.11 Sending
Documents without Reduction in
Chapter 5 Basic Sending and
Receiving Operations on page
5-15, and Section 2.12 Selecting
the Scan Area in Chapter 5 Basic
Sending and Receiving
Operations on page 5-18.
7.
Select the desired transmission
setting(s).
8.
Press <Start>. The document is
scanned.
Advanced Sending and Receiving Operations
NEC IT Series