NEC IT3510 Operation Manual page 258

Issue 1
3 - 64
Registering the F Code (Continued)
6.
Touch [Next].
7.
Touch [Enter] repeatedly until
the display returns to the stand-
by screen.
Modifying and Deleting Information
1.
Perform the same procedure as
in steps 1 and 2 under
Registering Abbreviated
Numbers.
Refer to Section 2.17 Registering
Abbreviated Numbers on page
3-58.
2.
Touch an abbreviated key to be
modified.
3.
Select the tab for the item to be
modified, then change the
registered details.
i
To modify:
Select the tab for the item to be
modified from: [Dest.], [Mode], and
[F CODE] menus. For details, refer to
Section 2.17 Registering Abbreviated
Numbers on page 3-58.
i
To delete:
Confirm the registered details, and
touch [Del.].
4.
Confirm the registered details.
Touch [Enter] if they are correct.
i
To modify:
Select the item to be modified, and re-
register it.
5.
Touch [Enter] repeatedly until
the display returns to the stand-
by screen.
NEC IT Series
Registration and Setting Operations