NEC IT3510 Operation Manual page 189

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Setting for the Numbering Function (Continued)
4.
Select the Distribution function.
Selecting the Initial Printed Number:
1. Use the 10-key pad to enter the initial number.
i
To Select:
Numbers can range from 000 to 999.
To set the initial number to 003, enter '3'.
i
If no initial number is set, numbering starts at 001.
Selecting Which Pages are Numbered:
1. Touch [First page only] or [All Pages].
i
To Select:
When [First page only] is touched, the number will just be printed on the first page of
each printed set.
When [All Pages] is touched, every page of the set is printed with the distribution
number.
Selecting the Contrast for the Printed Number:
1. Select the desired contrast for the printed number. Choices are:
[Darker], [Normal], and [Lighter].
5.
Touch [Enter].
6.
Press <Start>. Copying will now
begin.
Issue 1
2 - 67