NEC IT3510 Operation Manual page 54

Issue 1
1 - 10
Key Name
Press this key to enable the user management
Access
mode.
Press this key to interrupt an operation in progress.
Interrupt
The lamp will stay lit during the interrupt process.
Panel Reset Press this key to reset the touch panel settings.
Utility Press this key for registration and to make settings.
Press this key to confirm the setting status of each
Mode Check
function.
Press this key to insert a preset pause of three
seconds when dialing a telephone number. A
pause is needed, in certain cases, to enter
Pause additional numbers such as account numbers,
passwords, etc. The pause key can also be used
when registering One-Touch and Abbreviated
dialing keys.
Press these keys to enter a facsimile telephone
10-key Pad number, number of copies desired, or other data to
be registered.
Pressing this key will reset the number of copies
entered to "1". Pressing this key will also clear any
C (Clear)
data entered when dialing a number or registering
information.
Press this key to begin copying, transmission of a
facsimile, or reception of a facsimile after talking
Start (manual reception). Copy and transmission are
available while the lamp is green. When the lamp is
orange, copying and transmission are not available.
Press this key to stop an operation, such as
transmission or copying. This is not the same as
Stop
using the interrupt key, which temporarily suspends
an operation.
NEC IT Series
Function
Getting Started