Basic Receiving Operations; Changing The Reception Mode - NEC IT3510 Operation Manual

Issue 1
S 3 B
ECTION ASIC
When the NEC IT3510/IT2510 is in Automatic Reception mode, documents will be
received without any user intervention. Manual Reception mode is also available.
This section describes the receiving procedure concerning paper sizes and how the
unit handles an out-of-paper condition.
3.1
5 - 24
Using Chain Dialing (Continued)
6.
Select a destination.
Using the 10-key Pad:
1. Touch [10-key Dialing]
and use the 10-key Pad
to enter the destination's
number.
Refer to Section 2.1
Quick Memory
Transmission on page
5-1.
i
To re-enter the
number:
Use
cursor and re-enter individual
digits, or press <C> and re-
enter the entire number,
When [Delete] is touched,
the
cursor is deleted.
7.
Press <Start>. Transmission
now begins.
R O
ECEIVING PERATIONS

Changing the Reception Mode

There are two methods to receive a facsimile:
Automatic Reception:
Ë
The NEC IT3510/IT2510 will automatically answer the incoming call and
receive the facsimile without any action from the user.
[ ] [ ] to move the
character above the
Basic Sending and Receiving Operations
NEC IT Series