NEC IT3510 Operation Manual page 232

Issue 1
3 - 38
Priority Screen:

The initial value of the stand-by screen can be set. The factory
default setting is Auto.
Priority FAX Screen:

The initial value of the facsimile screen that is displayed when
<FAX/MAIL> key is pressed can be set. The factory setting is
One-touch.
Received Document:

The processing method when the mailbox receives documents can
be set. The factory default setting is Saved in Box.
Priority Quality:

The initial value of the image quality can be set.
default setting is Standard.
Priority Contrast:

The initial value of the contrast can be set. The factory default
setting is Normal.
Communication Mode:

The initial value of the communication mode can be set.
factory default setting is Com. Mode.
Transmission Mode:

The initial value of the transmission mode can be set to either
memory transmission or real-time transmission mode. The factory
default setting is Memory TX.
TSI

Sets the TSI printing position for the on the transmitted document.
The factory default is On The Doc.
TX Marker position (optional):

The TX Marker stamp position can be set. The factory default
setting is OFF.
TX Report:

The TX Report used for confirming the transmission results can be
set. The factory default setting is If TX Fail.
Report Screen:

Whether a copy of the document image is attached onto the TX
Report can be selected. The factory default setting is ON.
Maximum Print Page:

This is set to restrict the number of pages that can be printed per
user. Input range is 0 to 999, 999 pages.
NEC IT Series
Registration and Setting Operations
The factory
The