NEC IT3510 Operation Manual page 191

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Using the Book Scanner for Separate Scanning (Continued)
5.
After scanning is complete, load
the next document page in the
Book Scanner, then press
<Start>.
i
Repeat this operation until the
whole document is completely
scanned.
6.
Touch [Finish] when all
scanning is completed.
i
To add documents to be
scanned:
Touch [Continue] to re-start scanning.
Place the page on the glass and press
<Start>.
7.
Press <Start>. Copying will now
begin.
Using the 2-Sided Document Feeder for Separate Scanning
1.
Load the document in the
2-Sided Document Feeder.
For more information, refer to
Section 5 Handling Documents in
Chapter 1 on page 1-25.
2.
Press <COPY>.
3.
Select [Auxiliary] and touch
[Separate Scan].
Issue 1
2 - 69