Document Jam; Section 2 Troubleshooting - NEC IT3510 Operation Manual

Issue 1
Original's size cannot
be detected. Select
zoom.
Original's size cannot
be detected. Select
original size.
Original's size cannot
be detected.
1.3
8 - 6
Table 8-2 Alarm Messages (Continued)
Messages

Document Jam

Use the procedure shown to clear a document jam.
Before Starting Operations:
If the document becomes jammed, the touch panel displays a message: "Misfeed
detected. Remove misfeed at
remove the jam. Open the cover indicated at the arrow and remove the jam.
Jam in the Document Feeder Cover:
1.
Lift the Document Feeder
Cover.
Causes
The document size
could not be detected
with the automatic
size mode.
The document size
could not be
detected.
The document size
could not be
detected.
." and shows the cover needed to be opened to
NEC IT Series
Countermeasure
Set the zoom ratio.
Select a different paper size.
Place the document again.
Reselect the document size.
Cancel the image repeating
function.
Place the document again.
Reselect the document size.
Cancel the indicated functions.
Troubleshooting