Mixed Size Original Document Detection; Table 2-6 Examples Of Copying Mixed Documents - NEC IT3510 Operation Manual

Issue 1
2.4
2 - 32

Mixed Size Original Document Detection

Copy paper is selected automatically in accordance with the length of each
original document sheet fed in the ADF.
Before Starting Operations:
Original documents must be set in the ADF to use this function. Up to 50 sheets in
a document can be set at once.
The copy speed is slightly slower since the size of each sheet is detected prior to
copying.
If documents of different lengths are inserted without enabling this function, the copy
paper is selected on the basis of the first page of the document, and the same sized
paper as the first page will be used for the remainder (when used together with the
automatic paper selection function).
Stapling may not be possible when the automatic paper selection function is used
together with this function.
The optional 2-Sided Document Feeder is required to select the appropriate paper
in accordance with the length and width of each document. If the machine does not
employ the 2-Sided Document Feeder, only documents with the same width should
be set.
Handling Documents
Make sure the document sheets are fully inserted into the ADF.
Adjust the document guides to the document's width.

Table 2-6 Examples of Copying Mixed Documents

When the automatic size is used to select Letter sized paper.
With automatic paper selection
NEC IT Series
Copy Operations