NEC IT3510 Operation Manual page 268

Issue 1
3 - 74
Register the Batch Program (Continued)
9.
Confirm the details that have
been registered in the program
key. Touch [Enter] if they are
correct.
i
To modify:
Select the item to be modified, and re-
register it.
10.
Touch [Enter] repeatedly
until the display returns to
the stand-by screen.
Registering the Polling Reception Program
1.
Perform the same steps as
those of 1~4 under Registering
the Transmission Program.
Refer to Registering the
Transmission Program on page
3-68.
2.
Select [Polling RX], then touch
[Next].
3.
Select the destination.
i
Using a One-Touch key:
Touch the [One-Touch] key, touch the
One-Touch key for the destination, then
touch [Enter].
i
Using Abbreviated Dialing:
Touch [Abbr.#] to select the destination.
Touch [Enter]
destination.
after selecting the
Registration and Setting Operations
NEC IT Series