Pstn/Extension Line Switch - NEC IT3510 Operation Manual

Issue 1
2.7
3 - 20
Setting the Line Type (Continued)
4.
Confirm the dial type when the
screen returns to the same as in
step 2. Touch [Enter] if the data
is correct.
i
To modify:
Touch [Line Type] to change the
setting.
5.
Touch [Enter] repeatedly until
the display returns to the stand-
by screen.

PSTN/Extension Line Switch

When a PBX (Private Branch Exchange) is connected, this machine may not
correctly execute facsimile communication as is.
properly setting the unit when a telephone line is used via a PBX.
Before Starting Operations:
The factory default setting is for use on an external line (not connected to a PBX).
Setting for an External Line or PBX
1.
Touch [Initial Setting] on the
Administrator Management
screen.
Refer to Section 2.2 Accessing
the Administrator Management
Screen on page 3-12.
NEC IT Series
This section describes
Registration and Setting Operations