NEC IT3510 Operation Manual page 280

Issue 1
4 - 6
Transmission Settings (Continued)
1. Select [ON] or [OFF] to
have the relayed
document print at the
relay station, then touch
[Enter].
2. Select [TX Set 3], then
touch [Line Selection].
3. Select how the facsimile
line is to be selected,
then touch [Enter].
i
[Line Selection] is
displayed only when the
optional 2nd G3 Port is
installed.
i
When [Select] is
chosen, the user must
manually select which
port is used: Port 1 or
Port 2.
5.
Confirm the setting details
when the display returns to the
[TX Set 1] screen.
Refer to Section 2.4
Relay Transmission in
Chapter 6 Advanced
Sending and Receiving
Operations on page
6-11.
Refer to 2.3 Selecting
the Communications
Mode (For optional 2nd
G3 Port only) in
Chapter 5 Basic
Sending and Receiving
Operations on page
5-5.
Advanced Registration and Setting Operations
NEC IT Series