NEC IT3510 Operation Manual page 428

Issue 1
Memory is full.
Original left on glass.
Matching paper size is
not available. Reselect
paper size.
Matching paper size is
not available. Please
set matching paper in
the first cassette.
Auto Size mode cannot
used with the selected
paper size. Please
select a zoom ratio.
Replenish paper.
Please remove paper
in the Bypass tray.
This mode cannot be
selected with the
Interrupt mode.
This mode cannot be
selected. Paper
cassette has been
designated as "Not for
2-Sided Copies".
8 - 4
Table 8-2 Alarm Messages (Continued)
Messages
Memory is full.
A page remains on
the Book Scanner
glass.
There is no
appropriate paper in
any cassette that
meets the document
size and scaling
factor specified.
The appropriate
paper size in not
loaded.
The scaling factor
calculated from the
selected paper size
and document size is
not within the proper
range.
The paper in the
selected cassette.
Paper remains on the
Manual Bypass tray.
A function that does
not accept an
interruption is
selected.
A paper cassette with
paper that cannot be
printed on both sides
is selected for
2-Sided copying.
Causes
Reserve for transmission after
memory becomes available.
Print out any documents waiting
to be printed. This will free up
memory space.
Remove the document from the
Book Scanner glass.
Select the paper.
Load the proper size print
paper.
Set the proper size paper in the
first paper cassette.
Set the proper scaling factor.
Select the paper.
Load print paper.
Remove all paper remaining on
the Manual Bypass Tray.
Reset the Interrupt mode or the
function currently selected.
Reselect the paper.
Cancel 2-Sided Copying.
NEC IT Series
Countermeasure
Troubleshooting