Using Chain Dialing - NEC IT3510 Operation Manual

Issue 1
2.13
5 - 20
Selecting the Scan Area (Continued)
Confirming the Scanning Area:
The area scanned by the book scanner should be checked against the
mark on the periphery of the glass surface.
For example, when Letter (8 1/2" by 11") is selected, the part of the
document within the dotted area is sent.

Using Chain Dialing

Multiple One-Touch keys can be combined together to allow dialing of
authorization codes, extensions, PINs, etc., that may exceed the digit length of
a single One-Touch key.
Before Starting Operations:
Chain Dialing is possible by using the 10-key Pad, or via Abbreviated dialing, in
combination with a One-Touch key.
Numbers up to 192 digits long can be dialed when chain dialing is used. Numbers up
to 40 digits long are displayed on the touch panel screen.
Basic Sending and Receiving Operations
NEC IT Series