Section 1 Reports And Lists; Reports And Lists; Printing The Activity Report (Tx) - NEC IT3510 Operation Manual

C h a p t e r 7 Reports and Lists
S 1 R
ECTION
The NEC IT3510/IT2510 is designed to output a variety of reports for users to check
the status of operations such as transmissions, receptions, and other communications
reports. In addition, the unit will print confirmation lists of data registered in the
machine, such as facsimile numbers, program keys, index keys, etc.
1.1
NEC IT3510/IT2510 Operations Manual
L
EPORTS AND ISTS

Printing the Activity Report (TX)

The transmission activity report verifies, in report form, important details about
the transmitted communications.
Before Starting Operations:
This section describes how to manually print out the report.
The IT3510/IT2510 is set to automatically print out this report after 50 transmissions.
(Default is 50 transmissions). Refer to Section 2.3 Report Print Settings in Chapter 4
Advanced Registration and Setting Operations on page 4-17.
Printing the Activity Report (TX)
1.
Press <Utility>.
2.
Select [Report1], then touch [TX
Act. Report].
7 - 1