Issue 1
9.5
1 - 62
Installing and Adding Staples
This section describes how to install and add staples in the optional Mail-bin
Finisher Unit. When the Finisher Unit is first installed, staples will need to be
added to the stapler. When the warning message "There are no staples" is
displayed, the staple supply is exhausted and will need replacement.
Installing and Adding the Staple Cartridge
1. Push down on the Finisher cover knob and rotate the knob
counterclockwise. Lift up on the cover.
Figure 1-76 Opening the Stapling Unit Cover
2. Pull out the stapling unit.
Figure 1-77 Removing the Stapling Unit
NEC IT Series
Getting Started