NEC IT3510 Operation Manual page 230

Issue 1
3 - 36
Setting the Image Memory Holding Timer
1.
Touch [Initial Setting] on the
Administrator Management
screen.
Refer to Section 2.2 Accessing
the Administrator Management
Screen on page 3-12.
2.
Select [Manage] and touch
[Incomplete TX Hold].
3.
Touch [ L ] or [
the time, then touch [Enter].
i
To select:
Times from 10 minutes to 72 hours can
be set as the memory holding time.
(10, 20, 30, 40, or 50 minutes, and 1, 2,
4, 8, 12, 24, or 72 hours)
Every time [ M
time is shortened.
Every time [
L
time is extended.
When [Not Held] is touched, any
document not sent is immediately
deleted.
When [Cancel] is touched, it returns to
the initial screen.
4.
Confirm the setting details when
the screen returns as that shown
in step 2. Touch [Enter] if the
setting is correct.
i
To modify:
Touch [Incomplete TX Hold] to change
the setting.
M ] arrow to set
] arrow is touched, the
] arrow is touched, the
NEC IT Series
Registration and Setting Operations