NEC IT3510 Operation Manual page 318

Issue 1
4 - 44
Setting for the Priority Image Quality:
1. Select [TX 1], then touch
[Priority Quality].
2. Select the key for the
quality to be set as the
initial value, then touch
[Enter].
Refer to Section 2.9
Sending Fine Print and
Photos in Chapter 5
Basic Sending and
Receiving Operations
on page 5-12.
Setting for the Priority Contrast:
1. Select [TX 1] and touch
[Priority Contrast].
2. Select the density to be
set as the initial value,
then touch [Enter].
Refer to Section 2.10
Adjusting Contrast in
Chapter 5 Basic
Sending and Receiving
Operations on page
5-14.
Advanced Registration and Setting Operations
NEC IT Series