NEC IT3510 Operation Manual page 295

NEC IT Series
NEC IT3510/IT2510 Operations Manual
Automatically reset (to factory default settings) Upon Changing Users.
Ë
Sets whether to reset each function when the user changes. The factory
default setting is ON.
Copy Settings
1.
Touch [Copy Setting] on the
Administrator Management
screen.
Refer to Section 2.2 Accessing
the Administrator Management
Screen in Chapter 3
Registration and Setting
Operations on page 3-12.
2.
Setting the various copy
functions:
1. Select [Scan], and touch
[Mixed Original
Detection].
2. Select [ON] or [OFF] to
set the Mixed Original
Detection default setting,
then touch [Enter].
Issue 1
4 - 21