NEC IT3510 Operation Manual page 17

NEC IT Series
Do not place the product in an excessively
hot (over 87 degrees F) or cold (less than 27
degrees F) environment.
Doing so may result in erratic operation.
Do not install the product in a location that is
subject to excessive vibration.
Doing so may cause improper operation or
product damage.
Do not place the product in a location that is
subject to significant temperature changes
(such as near an air conditioner or heater).
Doing so may cause improper product operation
due to excess temperature variations and
increased condensation in the product.
Do not open any covers while the product is
operating.
Doing so will suspend operations and may cause
a paper jam.
NEC IT3510/IT2510 Operations Manual
Recommendations
This is a recommendation that indicates a certain procedure
should be followed for proper performance.
Do not place the product in a location where
chemical vapors are emitted.
Doing so may damage the product or cause
improper operation.
Do not operate this product near other
devices that are affected by electromagnetic
radiation (such as a radio or television).
This product complies within the limits for a FCC
Part 15 Class A digital device. If this product is
used in a residential location, it may cause
electromagnetic interference. In this case, the
user is asked to take appropriate measures to
minimize the interference.
Do not use a hard or pointed object to press
the Touch Panel.
Doing so may permanently damage the panel.
Do not lean or place any heavy objects on the
Operation Panel.
Doing so may result in Operation Panel failure.
Issue 1
11