NEC IT3510 Operation Manual page 312

Issue 1
4 - 38
Registration of the User's Number:
1. Select [User 1] and
touch [User Number].
2. Enter the user's number
(four digits), then touch
[Enter].
i
To re-enter the
number:
Press <C> and re-enter the
num ber.
touched, the display returns to
the initial status.
Registration of the User TSI:
1. Select [User 2], then
touch [User TSI].
2. Enter the User TSI and
touch [Enter].
Refer to Section 1.5
Entering Characters for
Registration in Chapter
3 Registration and
Setting Operations on
page 3-5.
W hen [Cancel] is
Advanced Registration and Setting Operations
NEC IT Series