Registering Program Keys - NEC IT3510 Operation Manual

NEC IT Series
2.19
NEC IT3510/IT2510 Operations Manual
Registering Index Keys (Continued)
4.
Enter the index key name, then
touch [Enter].
Refer to Section 1.5 Entering
Characters for Registration on
page 3-5.
5.
Touch [Enter] repeatedly until
the display returns to the
stand-by screen.
i
To register consecutively:
Repeat the procedure from step 3.

Registering Program Keys

Program keys are special keys registered to carry out routine functions at the
touch of a single key. If the same action is performed frequently (such as
sending documents to multiple destinations at a specific time, or making a
2-sided transmission with a certain image quality, etc.), the program key may
be registered so that all the needed features occur at the touch of a key.
Details that can be Registered:
The following four types of programs can be registered, as well as destination
data.
Transmission Program:

Image
Transmission, Real-time Transmission, Priority Transmission,
Timer Transmission, TSI, Destination Insertion, Transmission
Report, Remote Copying, Password Transmission, 2-TO-1
Transmission, 2-Sided Transmission, and TX Marker stamping can
be registered in program keys.
Batch Program:

Documents being sent to a common destination are stored into
memory all during the day.
documents are then transmitted to the desired destination.
Polling Reception Program:

The time to perform a polling reception can be registered.
Quality, Contrast, Reduction, Serial
At a programmed time, all the
Issue 1
Broadcast
3 - 67