NEC IT3510 Operation Manual page 240

Issue 1
3 - 46
Registering Users (Continued)
Setting the Priority Quality
1. Select [TX1], then touch [Prior-
ity Quality].
2. Touch a key for the image
quality to be set as the initial
value, then touch [Enter].
Refer to Section 2.9 Sending
Fine Print and Photos in
Chapter 5 Basic Sending and
Receiving Operations on page
5-12.
Setting the Priority Contrast:
1. Select [TX1], then touch [Priority Contrast].
2. Touch a key for the initial
contrast value to be set, then
touch [Enter].
Refer Section 2.10 Adjusting
Contrast in Chapter 5 Basic
Sending and Receiving
Operations on page 5-14.
Setting the Communication Mode (optional):
1. Select [TX1], then touch [Com. Mode].
NEC IT Series
Registration and Setting Operations