Sending A Document - NEC NEFAX655e Manual

Sending a Document

Sending a Document
Using Memory Transmit
2 - 1
Note: To use some of the fax functions such as One-Touch and Speed
Dial you must first program your unit. If your unit has not yet been
programmed, refer to Chapter 4 Programming.
Since your fax unit provides multi access capabilities, you can scan documents
into memory for transmission, even if your unit is in the process of transmitting
data from memory, receiving data or printing a file from the PC.
Note: If the unit runs out of memory during scanning, you can use
manual transmission by pressing the Speaker key or by using the Direct
Transmit ADF TX procedure.
1
Place your document face down on the
Document Feed Tray.
2
Adjust the Document Side Guides to
touch the edges of the document.
3
Use the TYPE ORG. key to select the desired contrast:
Use this setting for this
Normal Regular documents. (Default)
Dark Documents that are dark.
Light Documents having very fine or light characters.
NOV.07 12:34
-SET DOC. FACE DOWN-
100%
Basic Operations