Group Dial Keys - NEC NEFAX655e Manual

Group Dial keys

Instead of their regular functions, any of the One-Touch keys can be used as Group Dial
keys. Destinations already stored for One-Touch, Speed Dial can be entered in a Group
Dial key. Each Group can contain up to 50 locations.
Entering
Edit/Deleting
Facsimile Programming
1
Press the Program key and scroll through the
menus until you reach the DIAL REGISTRATION
Menu. Press YES to begin programming.
2
Press 3 or scroll down to the Group Dial menu and
press YES.
3
Press the One-Touch key you wish to use.
4
Press YES to accept the selection.
5
Enter the Group Name and press YES to accept it.
6
Enter the Key(s) you wish included in this group.
Remember, you can include One-Touch or Speed
Dial already in memory.
7
Continue to enter the locations you wish to include and then press YES. You are given the
opportunity to program additional locations. Continue to enter additional Speed Dial
locations or press NO to exit.
1
If you wish to change any entry, a screen allows you to accept it or change it.
2
If you wish to change a Key that was previously
programmed, this message appears. Press YES to
keep this location as is, or NO if you wish to edit it.
Dial Registration
DIAL REGISTRATION?
YES / or 1-6
3 GROUP DIAL?
OK=YES
-SELECT REGIST.KEY-
GROUP DIAL 25
or PRESS "YES"
GROUP NAME=_
OK=YES
NO.001=_
REGISTERED! KEEP?
OK=YES (EDIT/DEL=NO)
4 - 20