Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 829

TABLE 197
Field
ID*
IP_ADDRESS
WWN
NAME
CONTACT
LOCATION
DESCRIPTION
TYPE
MODEL
FIRMWARE_VERSION
VENDOR
MAX_VIRTUAL_SWITCHES
NUM_VIRTUAL_SWITCHES
REACHABLE
UNREACHABLE_TIME
OPERATIONAL_STATUS
CREATION_TIME
LAST_SCAN_TIME
LAST_UPDATE_TIME
SYSLOG_REGISTERED
CALL_HOME_ENABLED
SNMP_REGISTERED
USER_IP_ADDRESS
DCFM Enterprise User Manual
53-1001775-01
CORE_SWITCH
Definition
IP address of the switch.
Chassis WWN.
Switch name.
Any associated contact name, obtained through
SNMP.
Physical location, obtained through SNMP.
User assigned description, obtained through SNMP.
SWBD type number as given by Fabric OS.
Model type of the switch:
0 = Unknown
1 = Not applicable
2 = Fabric OS switch
3 = M-EOS switch
Embedded (Fabric OS or M-EOS) software version.
Switch vendor.
Maximum virtual switches allowed on this physical
switch.
Actual number of virtual switches carved out of this
physical switch. 0 means it is not operating in Virtual
Fabric model.
Whether reachable by HTTP.
When the switch became unreachable from HTTP.
Operational status as reported by the embedded
software.
Time when this record was created by the
Management application.
Time when this record was last updated.
1 = the Management application server is registered
with the switch to receive Syslog.
1 = Syslog is enabled for this switch.
1 = call home is enabled for this switch.
1 = the Management application server is registered
with the switch to receive SNMP traps.
User-assigned IP address. This is used for M-EOS
switches where Fabric OS seed switch fails to get the
IP address of the M-EOS switch.
D
Switch
Format Size
int
varchar 128
char 23
varchar 64
varchar 256
varchar 256
varchar 256
smallint
smallint
varchar 128
varchar 256
smallint
smallint
smallint
timestamp
varchar 128
timestamp
timestamp
timestamp
smallint
smallint
smallint
varchar 128
791