Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 602

20
Saving a master key to a smart card set
FIGURE 251
5. Select A Recovery Set of Smart Cards as the Backup Destination.
6. Enter the recovery card set size.
7.
8. Run the additional cards needed for the set through the reader. As you read each card, the
9. Enter the mandatory last name and first name of the person to whom the card is assigned.
10. Type a Card Password.
11. Re-type the password for verification.
12. Record and store the password in a secure location.
13. Click Write Card.
14. Repeat
15. Continue until you have written to all the cards in the set.
16. After the last card is written, click OK in the Master Key Backup dialog box to finish the
564
Backup Destination (to smart cards) dialog box
Insert the first blank card and wait for the card serial number to appear.
card ID displays in the Card Serial# field. Be sure to wait for the ID to appear.
The dialog box prompts you to insert the next card, up to the number of cards specified in
step 6.
step 7 through step 13
operation.
for each card.
DCFM Enterprise User Manual
53-1001775-01