18
Copying a PDCM configuration
3. Click Copy.
4. Enter a name for the configuration.
5. Enter a description for the configuration.
6. Select the check box for the switch to which you want to save the configuration in the Select
7.
472
The Save As/Copy dialog box displays.
FIGURE 200
Save As/Copy dialog box
Switch table.
Click OK.
A message displays stating that the outstanding port configuration is discarded when copying
a configuration from the switch with more ports to a switch with fewer ports and vice versa.
Click OK to close the message.
The copied configuration displays in the Available Switches table under the selected switch. To
edit this configuration, refer to
"Configuring an Allow/Prohibit manually"
"Configuring a PDCM Allow/Prohibit Matrix"
on page 470.
on page 468 or
DCFM Enterprise User Manual
53-1001775-01