Upload Failure Data Capture - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

8

Upload Failure data capture

Upload Failure data capture
You can use Upload Failure Data Capture to enable, disable, and purge failure data capture files as
well as configure the FTP Host for the switch.
NOTE
Upload Failure Data Capture is only supported on Fabric OS devices.
Enabling upload failure data capture
1. Select Monitor > Technical Support > Upload Failure Data Capture.
2. Select a one or more devices on which you want to enable automatic trace dump from the
3. Click the right arrow button.
4. Click OK on the Upload Failure Data Capture dialog box.
5. Click OK on the confirmation message, if necessary.
234
The Upload Failure Data Capture dialog box displays.
FIGURE 97
Upload Failure Data Capture dialog box
Available Switches with Upload Failure Data Capture Disabled table.
The selected devices move from the Available Switches with Upload Failure Data Capture
Disabled table to the Switches with Upload Failure Data Capture Enabled table.
DCFM Enterprise User Manual
53-1001775-01