Refreshing The Port Connectivity View; Enabling A Port; Disabling A Port - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

TABLE 12
Field
Switch Routing Policy
Switch Secure Mode
Switch Status
Switch Supplier Serial Number
Switch Version
Tag
Unit Type
User Port Number
Vendor

Refreshing the port connectivity view

To obtain configuration changes that occurred since the Port Connectivity View dialog box opened,
click Refresh.

Enabling a port

To enable a port from the port connectivity view, right-click the port you want to enable from the
Port Connectivity View dialog box and select Disable/Enable Port > Enable.

Disabling a port

To disable a port from the port connectivity view, right-click the port you want to disable from the
Port Connectivity View dialog box and select Disable/Enable Port > Disable.
DCFM Enterprise User Manual
53-1001775-01
Port connectivity properties (Continued)
Refreshing the port connectivity view
Description
Whether a routing policy, for example, port-based routing policy,
is enabled.
Whether switch secure mode is enabled.
The operational status. There are four possible operation
status values:
•
Up - Operation is normal.
•
Down - The port is down or the route to the remote
destination is disabled.
•
Disabled - The connection has been manually disabled.
•
Backup Active - The backup TCP port is active due to a
failover.
The serial number of the switch supplier.
The switch's version number.
The tag number of the port.
The switch unit type.
The port number of the user's device.
The hardware vendor's name.
8
209