Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 211

1. Click the Authentication tab.
2. Select the Enable Client Mutual Authentication check box, as needed.
3. Select the Enable Indication Mutual Authentication check box, as needed.
4. Click Apply.
5. Click Close to close the SMIA Configuration Tool dialog box.
DCFM Enterprise User Manual
53-1001775-01
FIGURE 77
Authentication tab
If the check box is checked, CIM client mutual authentication is enabled. If the check box is
clear (default), client mutual authentication is disabled.
If the check box is checked, indication mutual authentication is enabled. If the check box is
clear (default), client mutual authentication is disabled.
NOTE
Changes on this tab take effect after the next CIMOM server restart.
7
Authentication
173