Brocade Communications Systems Brocade BladeSystem 4/24 User Manual page 130

3
FTP/SCP overview
9. Click Test to test the FTP server.
10. Click OK on the message.
11. Click Apply or OK to save your work.
Testing the FTP and SCP server
To test the FTP and SCP server, complete the following steps.
1. Select Server > Options.
2. Select FTP/SCP in the Category list.
3. Choose one or more of the following options:
4. Click Test.
5. Click OK on the message.
6. Click OK to close the Options dialog.
92
A "Server running successfully" or an error message displays.
If you receive an error message, make sure your credentials are correct, the server is running,
the remote directory path exists, and you have the correct access permission; then try again.
The Options dialog box displays.
•
If you are using the internal FTP server, select the Use built-in FTP Server option.
For step-by-step instructions about configuring the built-in server, refer to
internal FTP server" on page 90.
•
If you are using the external FTP server, select the Use External FTP Server option.
For step-by-step instructions about configuring the built-in server, refer to
external FTP server" on page 91.
An "FTP or SCP Server running successfully" or an error message displays.
If you receive an error message, make sure your credentials are correct, the server is running,
the remote directory path exists, and you have the correct access permission; then try again.
"Configuring an
"Configuring an
DCFM Enterprise User Manual
53-1001775-01