Alishow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

aliShow

Displays zone alias information.
SYNOPSIS
alishow ["pattern"][, mode]
DESCRIPTION
Use this command to display zone configuration information.
Use the pattern operand to display only matching zone alias names in the defined configuration.
If no parameters are specified, all zone configuration information (both defined and effective) is
displayed. Refer to cfgShow for a description of this display.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
OPERANDS
When invoked without an operand, this command displays all zone configuration information (defined
and effective). Refer to cfgShow for a description of this display. The following operands are optional:
"pattern"
mode
EXAMPLES
To display all zone aliases beginning with "arr":
SEE ALSO
aliAdd, aliCreate, aliDelete,
Fabric OS Command Reference
53-1001764-01
A POSIX-style regular expression that matches zone alias names. This operand
must be enclosed in quotation marks. Patterns may contain:
•
Question mark (?) - matches any single character.
•
Asterisk (*) - matches any string of characters.
•
Range - matches any character within the range. Ranges must be enclosed
in brackets: for example, [0-9] or [a-f].
Specify 0 to display the contents of the transaction buffer (the contents of the
current transaction), or specify 1 to display the contents of the nonvolatile
memory. The default value is 0.
switch:admin> alishow "arr*"
alias: array1 21:00:00:20:37:0c:76:8c
alias: array2 21:00:00:20:37:0c:66:23
aliRemove
22
aliShow
49