Alicreate - Brocade Communications Systems Brocade 8/12c Command Reference Manual

Brocade fabric os command reference manual supporting fabric os v7.0.0 (april 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

22

aliCreate

aliCreate
Creates a zone alias.
SYNOPSIS
alicreate "aliName","member[; member...]"
DESCRIPTION
Use this command to create a new zone alias. The zone alias member list must have at least one
member (empty lists are not allowed). The alias member list cannot contain another zone alias. Refer to
the zoneCreate command for more information on name and member specifications.
This command changes the defined configuration. For the change to become effective, enable the zone
configuration with the cfgEnable command. For the change to be preserved across switch reboots, save
the zone configuration to nonvolatile memory with the cfgSave command.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
OPERANDS
The following operands are required:
"aliName"
"member"
EXAMPLES
To create a zone alias defined by domain and port index pairs:
To create a zone alias with one member defined by WWN.
SEE ALSO
aliAdd, aliDelete, aliRemove,
46
Specify a name for the zone alias, in double quotation marks. A zone alias name
must begin with a letter and can be followed by any number of letters, numbers,
and underscore characters. Names are case-sensitive. For example, "Ali_1" and
"ali_1" are different zone aliases. Spaces are ignored.
Specify a member or list of members to be added to the alias, enclosed in double
quotation marks. Members must be separated by semicolons. An alias member
can be specified by one or more of the following methods:
A switch domain and port index pair. Use switchShow for a list of valid port
index numbers.
A world wide name (WWN).
switch:admin> alicreate "array1", "2,32; 2,33; 2,34"
switch:admin> alicreate "array2", "21:00:00:20:37:0c:66:23"
aliShow
Fabric OS Command Reference
53-1001764-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.0

Table of Contents