Brocade Communications Systems Brocade 8/12c Command Reference Manual page 70

22
ag
To delete secondary port mapping for F_Ports 7, 8 and 9:
To set secondary port mapping for F_Ports 7, 8 and 9:
ADS Policy commands
To set the list of allowed devices for Ports 11 and 12 to 'no access':
To set the list of allowed devices for Ports 1, 10 and 13 to 'all access':
To remove two devices from the lists of allowed devices for ports 1 and 9:
To add a two new device to the lists of allowed devices for ports 1 and 9:
To display the lists of allowed devices on the switch:
Persistent ALPA configuration commands
To enable persistent ALPA in flexible mode:
36
switch:admin> ag --prefdel "7;8;9" 3
Preferred N_Port is deleted successfully \
for the F_Port[s]
switch:admin> ag --prefset "7;8;9" 3
Preferred N_Port is set successfully \
for the F_Port[s
switch:admin> ag --adsset "11;12" ""
WWN list set successfully as the Allow Lists of \
the F_Port[s]
switch:admin> ag --adsset "1;10;13" "*"
WWN list set successfully as the Allow Lists of \
the F_Port[s]
switch:admin> ag --adsdel "3;9"
"22:03:08:00:88:35:a0:12;22:00:00:e0:8b:88:01:8b"
WWNs removed successfully from Allow Lists of \
the F_Port[s]
switch:admin> ag --adsadd "3;9"
"20:03:08:00:88:35:a0:12;21:00:00:e0:8b:88:01:8b"
WWNs added successfully to Allow Lists of the \
F_Port[s]
switch:admin> ag --adsshow
F_Port WWNs Allowed
-------------------------------------------
1 ALL ACCESS
3 20:03:08:00:88:35:a0:12
21:00:00:e0:8b:88:01:8b
9 20:03:08:00:88:35:a0:12
21:00:00:e0:8b:88:01:8b
10 ALL ACCESS
11 NO ACCESS
12 NO ACCESS
13 ALL ACCESS
--------------------------------------------
switch:admin> ag --persistentalpaenable 1 -f
Persistent ALPA mode is enabled
Fabric OS Command Reference
53-1001764-01