Brocade Communications Systems Brocade 8/12c Command Reference Manual page 378

22
ficonShow
Incident Count
Link Incident Description
Link Incident Type
Listener PID
Listener Port Type
Listener Port WWN
Listener Type
Manufacturer
Model Number
Node Parameters
Parameters
Parm
344
Displays the incident count. This number increases by 1 for each incident within
the individual switch.
Same as Link Incident Type.
Indicates the link incident type as one of the following:
•
Bit-error-rate threshold exceeded
•
Loss of signal or synchronization
•
NOS recognized
•
Primitive sequence timeout
•
Invalid primitive sequence for port state
Same as PID.
Same as Port Type.
Displays the channel HBA port world wide name.
Indicates the listener type as follows:
Conditional
This port receives a link incident record if no other recipients from the established
registration list have been chosen.
Unconditional
This port is always chosen as a recipient of a link incident record.
Displays the manufacturer name or code.
Displays the model number.
Same as Parameters.
Displays the node type for the switch in three bytes, 0xAABBCC:
Byte AA 0x20
FC-SB-2 and updates
Byte BB 0x0a
Switch
Byte CC 0x00
Port number. It is dynamically assigned whenever a link incident occurs.
Displays the incident node parameters type in three bytes, 0xAABBCC:
Byte AA
Possible values include the following:
0x00
Reserved.
0x20
FC-SB-2 and updates.
Fabric OS Command Reference
53-1001764-01