Brocade Communications Systems Brocade 8/12c Command Reference Manual page 314

22
fcoeLoginCfg
--transshow
--transabort
--purge
--enable
--disable
EXAMPLES
To configure a login group and save the configuration:
To display the saved configuration:
To display the current FCoE login configuration for the switch only:
280
Displays the current configuration transaction in progress fabric-wide.
Aborts the FCoE login configuration transaction currently in progress.
Purges the specified entries from the effective configuration. Specify one or both
of the following operands:
-conflicting
Purges all conflicting login groups and conflicting VN_Port mappings from the
effective configuration.
-nonexisting
Purges all login groups for nonexisting switches from the effective configuration.
Enables the FCoE login configuration management on the switch. This allows only
configured Enode VN_Ports to log in. Use the fcoeLoginGroup command to
configure allowed Enode VN_Ports.
Disables the FCoE login configuration management on the switch. This allows
unrestricted login on Enode V_Ports.
switch:admin> fcoelogingroup --create login_def_allowall
-self -allowall
switch:admin> fcoelogincfg --save
switch:admin> fcoelogincfg --show
No ongoing transaction
Effective Configuration
***********************
Login Configuration
Switch WWN
10:00:00:05:1e:76:5c:80 login_def_allowall(active)
switch:admin> fcoelogincfg --show -switch
10:00:00:05:1e:76:5c:80
No ongoing transaction
Effective Configuration
***********************
Logingroup name : login_def_allowall(active)
Switch wwn : 10:00:00:05:1e:76:5c:80
All devices are allowed
Login group
\
Fabric OS Command Reference
53-1001764-01