Brocade Communications Systems Brocade 8/12c Command Reference Manual page 310

22
FCoE
--enable
--loginshow
--fcmapset
--fcmapunset
--fipcfg
--fipcfgshow
--resetlogin
EXAMPLES
To display the FCoE ports on the Brocade 8000:
276
Enables the specified FCoE port.
Displays information about the devices logged in to the specified FCoE port.
Configures the FCMAP values for Fabric Provided MAC Addresses (FPMA) for
the specified VLANs.
-vlan vid
Specifies the VLAN for which to set the FCMAP.
fcmapid
Specifies the FCMAP to be set.
Unsets the FCMAP for a specified VLAN. Devices previously logged in are
disconnected.
-vlan vid
Specifies the VLAN ID for which the FCMAP is unset.
Configures FIP multicast advertisement intervals.
-advintvl intvl
Specifies the interval in seconds. The minimum interval value is 0 and the
maximum value is 90. A value of 0 cancels the previous advertisement interval
value. A value of 1 to 90 is valid for changing the interval.
Displays FIP configurations.
Clears the logins that occurred through a front end port or from a device specified
by the Enode's VN_Port WWN.
-teport [slot/]port
Specifies the slot or port number.
-device wwn
Specifies the device WWN.
switch:admin> switchshow
switchName: elara133
switchType: 76.6
switchState: Online
switchMode: Native
switchRole: Subordinate
switchDomain: 133
switchId: fffc85
switchWwn: 10:00:00:05:1e:76:60:80
zoning: ON (cfg_fcoe)
switchBeacon: OFF
FC Router: OFF
FC Router BB Fabric ID: 1
Index Port Address Media Speed State Proto
==============================================
0 0 850000 id
10:00:00:05:1e:92:de:00 "pluto145" (upstream)(Trunk master)
1 1 850100 id
N8 Online FC E-Port
N8 Online FC E-Port
Fabric OS Command Reference
53-1001764-01