Brocade Communications Systems Brocade 8/12c Command Reference Manual page 262

22
dlsSet
DLS configuration commands on a switch with a port-based policy:
To attempt to enable Lossless while XISL use is enabled:
SEE ALSO
aptPolicy, dlsReset, dlsShow, iodReset, iodSet, iodShow, uRouteShow,
228
switch:admin> dlsshow
DLS is set by default with current routing policy
DLS is set with Lossless enabled
switch:admin> dlsreset
DLS is not set
switch:admin> dlsshow
DLS is not set
switch:admin> dlsset --enable -lossless
DLS and Lossless are set
switch:admin> dlsshow
DLS is set with Lossless enabled
switch:admin> dlsset
Lossless is set (unchanged)
switch:admin> dlsset --disable -lossless
Lossless is not set
switch:admin> dlsshow
DLS is not set
switch:admin> dlsset --enable -lossless
Lossless option cannot be enabled when XISL use is allowed.
Please disable the switch with 'switchdisable' and run \
'configure' to disallow XISL use before enabling Lossless.
topologyShow
Fabric OS Command Reference
53-1001764-01