Distribute - Brocade Communications Systems Brocade 8/12c Command Reference Manual

Brocade fabric os command reference manual supporting fabric os v7.0.0 (april 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

distribute

Distributes data to switches in a fabric.
SYNOPSIS
distribute -p policy_list -d switch_list
DESCRIPTION
Use this command to distribute data to a specified list of switches in the fabric. The distributed data must
be from the list of currently supported policy sets:
SCC
DCC
PWD
AUTH
FCS
Each supported database has a switch-local configuration parameter that controls whether the database
can be distributed and accepts distributions. Use the fddCfg command to view and modify these
parameters.
NOTES
IP Filter policies cannot be distributed with the distribute command. Use the chassisDistribute
command.
The password database received from a switch running pre-v6.3.0 firmware will be rejected by a Virtual
Fabric-enabled v6.3.0 chassis if it has more than one logical switch.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
-p policy_list
-d switch_list
EXAMPLES
To distribute the Switch Connection Control Policy and Device Connection Control Policy to domains 3
and 5 in the fabric:
Fabric OS Command Reference
53-1001764-01
Switch Connection Control Policy
Device Connection Control Policy
Password Database and Password Configuration Policy
E_Port and F_Port Authentication Policy
Fabric Configuration Server Policy
Specify the list of policy sets, also called security databases, to be distributed.
policy_list is a semicolon-separated list. Valid values include SCC, DCC, PWD,
AUTH, and FCS.
Specify the list of switches that should receive the data distribution. The
switch_list is a semicolon-separated list of one of the following:
Switch domain IDs
Switch names
Switch WWNs
A wildcard (*) may be specified to include all switches in the fabric that support the
distribute feature.
switch:admin> distribute -p "SCC;DCC" -d "3;5"
22
distribute
223

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.0

Table of Contents