Brocade Communications Systems Brocade 8/12c Command Reference Manual page 217

CTC configuration uses a transaction model. Configuration changes must be committed before they take
effect. Use the cryptocfg --commit command to commit the transaction. Refer to section "5. Transaction
management" for more information.
This command set supports the following tasks:
•
•
•
•
•
In addition, this command set includes the following display commands. Output may vary depending on
your configuration. Refer to the Appendix of the Fabric OS Encryption Administrator's Guide for a more
comprehensive explanation of system states.
Use the --show -container -all -stat command for runtime status information on all CryptoTarget
containers in the encryption group. The display includes the following information:
•
•
•
Fabric OS Command Reference
53-1001764-01
Configure and manage CryptoTarget containers (CTCs). Create, move, or delete a CTC, add or
remove initiators (hosts permitted to access the targets), or manually initiate a failback of an
encryption engine.
Configure and manage logical unit numbers (LUNs) for disk and tape storage devices: add a LUN to
a CTC, set or modify LUN encryption policy parameters, or remove a LUN from a CTC. Perform LUN
discovery.
Configure and manage tape pools: create a tape pool, set or modify tape pool encryption policies, or
delete a tape pool. Perform LUN discovery.
Manage rekey operations for primary and mirror LUNS.
Reallocate or change the world wide name (WWN) of virtual entities that have been moved or
removed from an encryption group. This operation is indicated when you want to eject a Brocade
Encryption Switch from an encryption group as a result of a move operation or a split EG, or if you
intend to remove an FS8-18 Encryption blade from an encryption group.
Encryption group name: user-define label
Number of containers numeric value
For each container:
-
Container name: user-defined label
-
Type: disk or tape
-
EE node: The node WWN
-
EE slot: the slot number for the encryption engine
-
Target: The target port WWN
-
Target PID: The target PID
-
VT: The virtual target port WWN
-
VT PID: The virtual target PID
-
Number of hosts: numeric value
-
Number of tape sessions (or rekey sessions): numeric value
-
Host: The port WWN
-
Host PID: The host PID
-
VI: The virtual initiator port WWN
-
VI PID: The virtual initiator PID
-
Number of LUNs: numeric value
-
LUN number: numeric ID
-
LUN type: disk or tape drive, tape medium changer, tape attached medium changer, tape
offline/unknown, or unsupported/other
-
LUN serial number: The LUN serial number
-
Encryption mode: encrypt or cleartext
-
Encryption format: (brocade) native or DF-compatible
-
Tape policy type: pool-based, LUN-based
22
cryptoCfg
183