Cfgremove - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

cfgRemove

cfgRemove
Removes a member from a zone configuration.
SYNOPSIS
cfgremove "cfgName","member[; member...]"
DESCRIPTION
Use this command to remove one or more members from an existing zone configuration. If all members
are removed, the zone configuration is deleted.
This command changes the Defined Configuration (see cfgShow). For the change to become effective,
enable the configuration with the cfgEnable command. For the change to be preserved across switch
reboots, save the configuration to nonvolatile memory with the cfgSave command.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
OPERANDS
The following operands are required:
"cfgName"
"member"
EXAMPLES
To remove a zone from a configuration:
SEE ALSO
cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgSave, cfgShow, cfgTransAbort,
cfgTransShow
100
Specify a name for the zone configuration, enclosed in double quotation marks.
Specify a zone member or a list of zone members to be removed from the
configuration. The list must be enclosed in double quotation marks. Members
must be separated by semicolons.
switch:admin> cfgremove "Test_cfg", "bluezone"
Fabric OS Command Reference
53-1001764-01