Cfgdisable - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

cfgDisable

cfgDisable
Disables a zone configuration.
SYNOPSIS
cfgdisable
DESCRIPTION
Use this command to disable the current zone configuration. The fabric returns to non-zoning mode, a
mode in which all devices can see each other.
This command ends and commits the current zoning transaction buffer to both volatile and nonvolatile
memory. If a transaction is open on a different switch in the fabric when this command is run, the
transaction on the other switch is automatically aborted. A message displays on the other switches to
indicate that the transaction was aborted.
If the default zone access mode is "No Access", then this command becomes equivalent to cfgEnable
"d_efault_Cfg". Refer to defZone help for information on zone access configuration.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
When an FCS policy is enabled, this command can be issued only from the primary FCS switch.
OPERANDS
None
EXAMPLES
To disable the current zone configuration:
SEE ALSO
cfgClear, cfgEnable,
98
switch:admin> cfgdisable
You are about to disable zoning configuration. This
action will disable any previous zoning configuration.
Do you want to disable zoning configuration? \
(yes, y, no, n): [no] y
cfgSave
Fabric OS Command Reference
53-1001764-01